1. Introduction:
This machine ID designed for shaping plane and formed surfaces. If used for shaping plane surfaces, t-slots and dovetail slots, etc. On narrow and long

workpleces, the machine will obtain much higher productivity. With the equipment of a special vice or a dividing head, the machine can be used for processing the end surfaces and slots with equal distance on cylindrical or rectangular workpieces.

2. Main specification:
Max. Shaping length: 500mm
Max. Distance from lower edge of RAM to table: 370mm
Max. Travel of table: Horiazontal: 500mm; vertical: 300mm
Max. Swivel angle of table: Without vice: +/-90; with vice +/-55
Max. Vertical travel of tool head: 110mm
Frequency of RAM strokes: 15, 24, 37, 51, 64, 80, 102, 126, 158 times/min.
Table feed per RAM stroke:
Pawl riding over 1 ratchet tooth:
Vertical: 0.0845mm;
horiazontal: 0.133mm Pawl riding over 10 ratchet teeth:
Vertical: 0.845mm;
horiazontal: 1.33mm
Motor: 3kw,1420 R/min.
Vice measurements: ( width x deptch x max. Opening): 240 x 64 x 215mm
Overall dimension: 1943 x 1160 x 1533 mm
Packing dimension: 2190 x 1380 x 1490 mm
Gross weight/net weight: 2100 kgs/1800 kgs