Web Toolbar by Wibiya

GGSL on Facebook

Home Food Production Machines Centrifugal Juicer 1000K 2000K
Centrifugal Juicer 1000K 2000K PDF Print E-mail
Written by Administrator   
Monday, 14 December 2009 14:01

 

Feature:
  1.Automatic ally divide juicer and residue.
  2. Continues 8 different juice spout positions make it suitable for location.
  3. All parts in contact with juice are made of stainless steel.


  4. Easy to clean, put 500ml water in the machine and turn on power switch only.
Operating instruction:
    Place the machine on the stable, connect power plug to a grounded power, source, and turn on the power, source, and turn on the power switch. (Make sure to plug into normal 10amp power point). The machine is ready to press. Cut pre-washed fruits or vegetables, then put them into the feed mouth, use pushing stick to push them into the machine. The juice will flow from juice outlet and residue will spurt from the residue outlet.
Attention:
   1.Before using the machine, make sure to use alternating current 220V/50Hz and plug into normal 10amp power point and must nave grounded power.
   2.Be sure to put 2pcs peg in the net and blade of the machine, screw the nut. Close the cover.
   3.The machine can not press the fruits which have hard cord, such as peach, mango and the fruits which have less moisture content, such as banana coconut also are not suitable to use this machine.
   4.The feed stick must be used when the user put the fruits of vegetables into the machine; not other things can substitute for it, to avoid damage the machine.
   5.Must keep the residue outlet unobstructed.
   6. Do not directly wash the around of motor by water, to avoid the damage of motor or leakage of electricity.
   7.Before cleaning the machine, be sure to switch off and unplug the power connection.
Daily maintain:
    Before cleaning the machine, be sure to switch off and unplug the power connection. Do not use alkali or strong acid detergents to clean the machine. Must keep the net, blade core and residue outlet cleaning  and use a cloth to clean each part. Finally, Return all cleaned parts back to their positions.

 

Last Updated on Tuesday, 09 August 2011 04:23
 


Powered by Cyberbuddies Limited.